High detection accuracy, good stability; strong anti-interference;
Small size, light weight, various installation structures, easy to install and use;
Continuous measurement of forward and reverse torque without repeated zero adjustment;
There are no wearing parts such as conductive rings, and it can run at high speed for a long time;
The high-level frequency signal output by the sensor can be directly sent to the computer for processing;
Measure the strength of the elastic body and can withstand 100% overload
Specification |
Technique |
Capacity |
0.1-5N.m |
Sensitivity |
1~1.5mV/V |
Zero balance |
±0.02mV/V |
Non-linearity |
±0.1%/±0.3%F.S. |
Hysteresis |
≤0.05%F.S. |
Repeatability |
≤0.05%F.S. |
Input impedance |
750±10Ω |
Output impedance |
700±5Ω |
Temp. effect on output |
0.03%F.S./10℃ |
Temp. effect on zero |
0.03%F.S./10℃ |
Insulation resistance |
≥5000MΩ/100V(DC) |
Recommended excitation |
10~15V |
Compensated temp. range |
-10~60℃ |
Operating temp. range |
-20~65℃ |
Safe overload |
150%F.S. |
Ultimate overload |
200%F.S. |
Cable length |
Φ5.2*3000mm |
Material |
Stainless steel/alloy steel |
Dynamic torque sensors are generally used to test occasions where the torque changes drastically, and it is necessary to capture torque or torque peaks, such as screwdrivers, electric wrenches, motor output torque, engine output torque, drill rod torque. In some occasions, because the test object is rotating, the dynamic torque sensor can also rotate for the convenience of testing. It can also be used for the detection of torque and power in sewage treatment systems, the detection of torque and power of fans, water pumps, gearboxes, torque wrenches; laboratories, testing departments, production monitoring and quality control; process industry and process industry.
Name:
Mobile:+86 18921011531
Tel: +86-519-85781529
Whatsapp:8618921011531
Email:nickinfo@fibos.cn
Add:12-1 Xinhui Road, Fengshu Industrial Park, Changzhou, China